Personally I only use them as a last resort. They finish somewhat decent on hard paints but on soft - medium paints they create a lot of...
I dry 90% of the car with an electric blower then pat dry any remaining water with a WW. I find the key to a streak free finish is having the...
I did one boat before. I found marine stuff just flat out works better on gelcoat than most automotive stuff. Using a DA will take you a while, I...
This awesome M3 Sedan was booked in by a existing customer to receive a full interior & exterior deep cleaning as well as an engine detail. No...
I find they cut more, are easier to clean, and dust less. They finish down pretty well too, so a lot of times you can get away with just a 2 step.
I've never got micromarring on a orange pad with powerfinish when worked in properly.
Wow. Meguiars, Optimum, Chemical Guys, and now Uber.
This is what you want: http://www.ipdusa.com/products/4801/110595-multi-purpose-bone-tool
Cool. One of the reasons i'm a big fan of their products is that they continuously make them better. Can't wait to try it.
Both cut well, obviously the Surbuf with M105 will cut more but you get a lot of micro marring and haze with them. Personally I much prefer D300...
That's a risk your willing to take, but personally, I wouldn't put that stuff anywhere near a set of wheels that cost over 5K. Especially if the...
Good info here, but the wheels the OP posted are etched and beyond cleanable.
I cleaned them with regular car wash soap and water before hand. Give P21S polishing soap a shot first, then OPT metal polish and the polishing...
Metallic flakes really pop now. ONR + OPC are my two favorite products. So versatile and effective.
I got mine from Wisdom Detail. Mine aren't completely falling apart, but I do see some bristles shed often.
IMO wheel brightener on a polished lip is pretty risky and could possibly make things worse. Clay won't do much for the etching either. Iv'e done...
If the spokes are clear coated you can polish them with the same stuff you polish paint with. The outer lips need to be done using a metal polish...
Awesome! Any idea when 3 inch DA backing plates will be coming in?
Bring the longest extension cord you have. You can probably get away with D300 on a Megs cutting disc for a one step. I just did a one step on a...
D300 with the Megs cutting disc or OPT Compound 2 with the Optimum Microfiber cutting pad both work well.
Separate names with a comma.
