Congratulations on picking out an outstanding machine. Compared to the Dewalt or the Makita 9227c, this Rotary is going to be shorter, thinner,...
If it were me I would get the Flex PE14-2-150 because it starts at 600rpm soft start, and the other Flex L3403 VRG starts at 1100. The Flex PE...
I use with great success up here in the land of giant conifer trees, Goof Off in the little yellow can from Home Depot, etc. Always do a Test...
I have all 3 - the green 3m, the yellow 3m, and the Meguiars. Are you using a Rotary or PC ? I find the green tape does not stick very well...
Think that the extra 4hp motor alone is well worth the extra money. You get 2 4hp motors, more heated air, and as I said before, nothing blows...
The 8HP Master Blaster is also at autoanythingdotcom... It absolutely rocks for blowing water off and blowing out dirty interiors, etc... The...
The 8HP Master Blaster is also at autoanythingdotcom... Dan F
Some people had or made contacts in Europe and went to a great deal of trouble, dollars, and time to get some imported directly to them. From...
Menzerna SuperFinish PO106FA on a Rotary is exactly what I used on a 2007 Black Subaru STI and it was the only combo that worked great on this...
I believe the Flex 3403 is a Rotary that starts at 1100 rpm or so; its lighter than the PE13-250 but does not have soft start 600 rpm starting...
What's this you say, Ken ???? :) Dan F
I have a couple of bottles of 101 but I also do this full time and that is the justification. Have not had anything that bad to correct since I...
The Flex 3401VRG is only a challenge to use at first because it rotates in the opposite direction of the other machines. Once you get past that,...
I use a 2 gpm gas engine power washer for all my Details. It is great at cleaning engine compartments, the insulation pad under the hood, and...
Thanks Woob, SoCal Garage, Greg Nichols, and habeba86 !!!! This is what we all need to do to help protect our equipment better and make less of...
BoredStudent -- I use either one (C/Guys or MicroRestore), whichever is less money when I buy the gallon. They both work about the same. I put...
I also wash all my microfiber separately, in an HE washer. I only use Micro-Restore or Chemical Guys microfiber wash (save yourself a lot of...
I have DTAILER on my Jeep; amazed that it was even available. Dan F
Greg - Excellent work and information ! I have seen these hoses on Renny Doyle's site but he wants huge bucks for them and the machine I think....
We are glad to help ! :) Regarding damaging the paint if you dont clay - no, its supposed to be - if you clay too aggressively, or without a...
Separate names with a comma.
