Upgreyyed!!!

Discussion in 'Detailing Bliss Lounge' started by Cooter, Sep 1, 2009.

  1. Cooter

    Cooter Guest

    Hey guys!! Just got a delivery from UPS!!!!!! I ordered some parts off Amazon (Brake Pads)
    and Baer Decelarator brake rotors and FRPP 4:10 Ring n Pinion from Blue Oval Industries!!!
    Should have the brakes done in a week or so and then later get the gears installed. Hopefully it wont hurt my gas mileage too bad!! I only drive with in about a 30 mile radius if that much.

    [​IMG]
     
  2. Hum-Benz

    Hum-Benz Wax on..Wax off

    What are you putting it on?
     
  3. slanguage

    slanguage OD On Detailing

    Hawk pads are supposed to be nice, but watch that dust!

    Nice stuff.
     
  4. Cooter

    Cooter Guest

    Going on my 05 Mustang GT.

    Thanks Roger!!
     
  5. GDAL

    GDAL Guest

    Had them on my 04 Goat with DBA rotors and they were so nasty I had to powdercoat the rims graphite grey
     
  6. SSTG

    SSTG DB Forum Supporter

    You gonna paint the hats Heath?
     
  7. pektel

    pektel DB Forum Supporter

    Nice! Wish I could gear up my Lincoln LS. It has an 8.0" pumpkin, so the 8.8" gears don't work :(. What I was able to to was get rid of the open diff. I was able to pull an LSD carrier out of an 05 mustang GT, and swap it into my case. just had to reuse the ring gear and pinion (3.31's).

    Nice brakes too. I have Rotorpros drilled/slotted rotors (centers painted black), and ceramic pads. Also have Stoptech braided Stainless Steel brake lines. I noticed a significant increase in brake performance. Oh, and I also went to Motul DOT4 synthetic brake fluid.

    You doing the gear setup yourself?
     
  8. Cooter

    Cooter Guest

    Hey Pete!! Thanks. No, i'm not even gonna try a gear install on my own. I will have a set of 3:55's when i'm done though hint hint!! hahaha
     
  9. pektel

    pektel DB Forum Supporter

    Haha, I don't really want to tear into the diff again quite yet. The crappy part is no stock 8.8" gears will work in the smaller 8.0" case. Leave it to FLM to make it difficult for me.

    Did you get rotors/pads for all 4 corners?
     
  10. Cooter

    Cooter Guest

    Yeah. I got all 4 rotors. Blue Oval Industries had them on sale. $299 for the set of 4. I ordered the pads on Amazon and got the free ground shipping.

    Upgreyyed was intentional. This movie called Idiocracy has a pimp named Upgreyyed in it hehe.
     
  11. Asphalt Rocket

    Asphalt Rocket Nuba Guru

    Very nice Heath, glad to see you got your stuff. You can put gears in, it's not that hard at all.
     
  12. Cooter

    Cooter Guest

    I would but man, I just dont wanna screw that up. Its my only ride. I'd just feel more comfortable with someone thats installed a ton of them. I'm scared I'd get it out in the road and start hearing the dreaded whine!!
     
  13. Asphalt Rocket

    Asphalt Rocket Nuba Guru

    I hear you, just giving you are hard time. On a serious note it really isn't that hard. You are going to put your own brakes on though, right?
     
  14. Cooter

    Cooter Guest

    Cough cough. Yeah, i'm doing the brakes.
     
  15. pektel

    pektel DB Forum Supporter

    Yeah it's not very difficult, but if you don't have any previous experience with it, you are probably better off spending what... 150 for someone else to set it up? Cheap price for peace of mind.

    And on brakes, if you can change a flat, you can do the brakes.
     
  16. Asphalt Rocket

    Asphalt Rocket Nuba Guru

    There are just too many things to reply to that.:baby:
     
  17. Cooter

    Cooter Guest

    As long as it doesnt involve certain sleeping attire hehehe
     
  18. Asphalt Rocket

    Asphalt Rocket Nuba Guru

    Hahahahaha, that is priceless. Just for that I may have to post some. Man that is just too funny.
     
  19. Cooter

    Cooter Guest

    LMAO!!! Thought you'd like that!!
     
  20. Asphalt Rocket

    Asphalt Rocket Nuba Guru

    I can't stop laughing about that.
     

Share This Page