So I've had my Gilmour Foammaster II for quite some time already and I still haven't cracked it open. I think now I am finally ready to put it to use. However, through my several searches, I'm still lost as to what sort of dilution ratios I should be looking at. Some say 2 oz., some say 4 oz., etc. :shead: Also, some tips for setting up the foam gun correctly for the desired ratio would be nice. What I have available for use is Meg's DCCW, Meg's Shampoo Plus, Eagle One Nanowash & Wax, Blue Coral Wash & Wax, and a little bit of Meg's NXT. Will dilution ratios be the same across the board for all car washes for LSP-stripping and non-LSP-stripping applications? Please chime in if you have any experience with the foam gun and the above car washes or just have general advice for the foam gun experience. I'm too excited to try it out in a few hours time! :tiptoe:
