AIO for wheels

Discussion in 'Pre Wash, Wash, Decon, Claying, Engine, Wheels, an' started by StiCy, Aug 12, 2009.

  1. StiCy

    StiCy Birth of a Detailer

    I was wondering what AIO would be best for my wheels. Will be doing the work by hand. I was thinking about klasse or xmt 360. Thoughts?
     
  2. Reflect

    Reflect DB Forum Supporter

    Try Duragloss 501.
     
  3. Ch40t1c

    Ch40t1c Obsessive Detailer

    Klasse AIO is an excellent one, aswell as Optimum metal polish.
     
  4. P1et

    P1et Official DB Moderator

    I use Jetseal 109 on my wheels!
     
  5. flash gordon

    flash gordon Banned

    Extreme Metal Polish
     
  6. J BELL

    J BELL Nuba Guru

    I use KAIO followed by HGSG...seems to work well for me
     
  7. supercharged

    supercharged DB Forum Supporter

    DG #105, or Zaino AIO.
     
  8. Buddy

    Buddy Getting to know Detailing

    I use Dura-Gloss 501 and XMT 360 both work like a charm...:thumb:
     
  9. slanguage

    slanguage OD On Detailing

    DG 105 or smartwax rimwax.
     
  10. rwisejr

    rwisejr DB Forum Supporter

    ZAIO,XMT360,D151 and top with Optiseal,ZCS or rejex
     
  11. - Z -

    - Z - Virgin Detailer

    Are you looking for the AIO to be abrasive, otherwise yes, DG 501.


    Metal polish on lacquered wheels? I'm presuming the OP’s wheels are lacquered…
     
  12. StiCy

    StiCy Birth of a Detailer

    Whoops forgot to mention my wheels are painted and have a clear coat.
     
  13. StiCy

    StiCy Birth of a Detailer

    I got XMT 360 on its way.
     
  14. richy

    richy Guest

    I completely agree with Buddy on this one. Both work well. Either one can and should be followed up with a sealant to give further protection against break dust.
     
  15. kaiten408

    kaiten408 Jedi Nuba

    I've tried Klasse AIO before but for my car (BMW) the brake dust is just too bad and I find the Klasse AIO doesn't hold up for a long time.

    I've started using Wheel Wax, 2x coats on the front, and it does wonders. I just have to be careful when washing my wheels to not use a strong APC or else it removes it all and then I go back to having black rims
     
  16. StiCy

    StiCy Birth of a Detailer

    Will XMT 360 not seal my wheels?
     
  17. kaiten408

    kaiten408 Jedi Nuba

    It will, but I don't imagine that it will be that durable. The wheels get pretty hot, and it's a spray carnauba wax so that means there is lower % content than a typical paste wax, and less durable that a good sealant.
     
  18. 02CAMSS

    02CAMSS Jedi Nuba

    I use duragloss 101 with aquawax as a booster every other wash(just spray it on the wet wheel and dry it off)and I cannot remember the last time I used wheel cleaner on my 140 mile a day commuter car.
     
  19. StiCy

    StiCy Birth of a Detailer

    The XMT I got is not a spray, its a paste. I don't know if this counts as a wax, I guess its more of an AIO. Heres what I got:

    XMT 360™ Corrects, Cleans, Seals : XMT 360 corrects, cleans, and seals auto paint! XMT 360 is more than a cleaner wax, its a swirl remover, polish, and paint sealant in one.
     
  20. rwisejr

    rwisejr DB Forum Supporter

    Yes it will . But I still top it with ZCS,Optiseal or rejex to really seal it
     

Share This Page