too much dust

Discussion in 'Last Steps: Waxes, Sealants, and Coatings' started by karbonphiber, Jun 21, 2008.

  1. karbonphiber

    karbonphiber Any Rag Vehicle Washer

    didn't know where to post this but am looking for help on this.

    Dust seems to cling to my car...anyone else have this problem?

    I'll park my car in my garage or at work (not dusty areas) and after i get off work or take the car out the next day the car would be covered in a fine layer of dust.

    I noticed this more after i did a complete detail on it about a month ago.

    any ideas?
     
  2. detaildoc

    detaildoc Guest

    FK 425 helps a great deal to minimize dust. It is a QD with one of the best anti-static properties out there, give it a try. However, know that you will still get dust, just not as much. It adds a lot of gloss and leaves the finish very slick. Finish Kare FK1 Consumer Detailing Products
     
  3. Marc08EX

    Marc08EX Jedi Nuba

    Anytime you detail your car, I would assume that the dust would cling easier because of the static electricity build up. I once polished half of the car (had to stop) and you can tell that the dust on the polished side is worse than the side that hasn't been polished/waxed.
     
  4. bryansbestwax

    bryansbestwax DB Forum Supporter

    Most good waxes have anti static properties(compounds in them). Some definitely work better thaan ohers, I find spritzing my mf with a QD for the final touch up takes some of the static away.
     
  5. yukon cornelius

    yukon cornelius Birth of a Detailer

    I have not used it, but from everything I've read, detaildoc is right on the money with the FK425.
     
  6. karbonphiber

    karbonphiber Any Rag Vehicle Washer

    thanks for the input. Just ordered FK 425
     
  7. detaildoc

    detaildoc Guest

    Sweet! :applause: You won't be disappointed with this QD.
     
  8. joep

    joep Welcome to Detailing

    what product did you use for your last step wax/sealant ?
     
  9. distrbd

    distrbd New Member

    Most CG,s glazes ,sealants have anti static properties.
     
  10. karbonphiber

    karbonphiber Any Rag Vehicle Washer

    zymol titanium
     
  11. joep

    joep Welcome to Detailing

    wow !! nice product in that case i think calagary mentioned the oils in the wax need time to cure then the he follows up with zymol field glaze..i haven't used zymol ,but i have experienced plenty of dusting atfer using a nauba wax and its a pita..
     

Share This Page