Werkstat Prime Strong or Blackfire Total Polish and Seal?

Discussion in 'Last Steps: Waxes, Sealants, and Coatings' started by Red Orc, Feb 20, 2013.

  1. Red Orc

    Red Orc Birth of a Detailer

    Red Orc, Feb 20, 2013
    #1
  2. fech

    fech Birth of a Detailer

    I haven't used the Blackfire, but you can't go wrong with the Werkstat. It's a great product!
     
    fech, Feb 20, 2013
    #2
  3. Colinpd137

    Colinpd137 Any Rag Vehicle Washer

    I haven't had the chance to use Werkstat (never heard of it?) but love the results from blackfire total polish & seal and use it constantly.
     
    Colinpd137, Feb 20, 2013
    #3
  4. Red Orc

    Red Orc Birth of a Detailer

    What I really need is somebody who's used both.

    I really love Prime Strong. It's been my go-to product for a few years now.
    But I also liked Blackfire when I used it a few years ago but it was the sealant not the AIO.
     
    Red Orc, Feb 20, 2013
    #4
  5. Bunky

    Bunky DB Forum Supporter

    I have used Blackfire. It is seems to work as advertised It is a mild polish but the sealant has basic durability. In most cases, one would top it. It does smell great and easy to use (no dusting, excessive drying/caking). You just need to keep the pad clean. I have not used the other.
     
    Bunky, Feb 20, 2013
    #5
  6. 01GreyStangGT

    01GreyStangGT Any Rag Vehicle Washer

    Both are very good. From my understanding, the Blackfire can be topped immediately if it has been applied by DA.
     
    01GreyStangGT, Feb 20, 2013
    #6
  7. detaildude3629

    detaildude3629 Birth of a Detailer

    I use Black Fire also with good results and sometimes i add a bit of 105 to it to get more cut so i still have a onestep use this in areas that need more correction, i also top it with no problem.
     
    detaildude3629, Feb 20, 2013
    #7
  8. john baker

    john baker Birth of a Detailer

    blackfire might have a bit more cut &werkstat will last longer, maybe ken will jump in.
     
    john baker, Feb 21, 2013
    #8
  9. DirtyWeRX

    DirtyWeRX DB Forum Supporter

    Werkstat Prime Strong toped with Acrylic Jett.... Enough said
     
    DirtyWeRX, Feb 21, 2013
    #9
  10. Red Orc

    Red Orc Birth of a Detailer

    Prime Strong + Blackfire + Acrylic Jett?:kilt:
     
    Red Orc, Feb 22, 2013
    #10
  11. TroyScherer

    TroyScherer DB Forum Supporter


    I have and use both.

    Prime Srtong has more cut and cleans better.

    BF TP&S leaves a nicer "looking" finish. But the durability is not all that good. It looks nice and is a good base for BFWD.



    If I was trying to clean and correct I would go with Prime Strong. If I wanted an easy just waxed finish that I could redo every few months I would go with BF TP&S.
     
    TroyScherer, Feb 22, 2013
    #11
  12. Red Orc

    Red Orc Birth of a Detailer

    If I stick with inexpensive products I really think I'll be going with Prime Strong + Blackfire (original not the AIO) + Acrylic Jett
     
    Red Orc, Feb 23, 2013
    #12

Share This Page