Polishing Wheel Lips

Im about to get a set of BBS LM's for my gti (used) they have a little less than 10k miles on them. Right now the lips are just the "brushed" look and i was wanting to polish them

whats the best way/polish to get. The wheels have tires on them already so if possible a good way to do it without having to take the tires off :headbang:I dont mine taking the face off the wheels though cause thats something i can do on my own

I figured after polishing them a good wheel wax to seal them or should i do something else... current wheel wax ive been using is Autofinesse mint rims

 

Toss some photos up and we can guide you.

 

wheels are not here yet...


I want to achieve a look like this on the lips... ive seen lots of videos and how too's just wondering if anyone has done this

 

They can be either a clear coated, anodized, or bare polished aluminium (using a metal polish will turn the cloth black if the metal is not coated) in which case different types of polishes are needed for each.

1. Bare (uncoated) aluminium; remove any grease with a d-limonene (citrus) based cleaner P21S® Total Auto Wash. Use Optimum Metal Polish and a Mother’s Powerball and then wash with P21S® Polishing Soap

2. Clear coated; Wash surface with P21S® Total Auto Wash, remove any brake dust / tar and then use a polymer sealant

3. Protect surface with Opti-Seal

Mask the tyre and the inner matte black paint with painter's masking tape

 

when i re-finished my wheels, i used a bunch of different products. I saw the best out of PC Polish compounds applied with a PC

 

BUSCH! Is the Best!