Best combo to make white stupidly bright

FK1000 topped with Z8,just make sure you're wearing sunglasses.LOL

 

to bump this, whats a good pre wax cleaner to use to make autoglym hd pop even more? prima amigo?

 

Werkstat Prime Strong or Prime Acrylic. Apply by hand or via PC on a white pad. Even after washing and claying, these products will pull enough dirt out of the paint to turn the applicator pad brown and both lay down a base layer of sealant as well. Great for one stepping door jambs.

 

on my work truck it's 501/111/AW

lately i tried optimum opti-seal/optimum car wax and that looked awesome too

 

like BFWD topped with Collinite 845. The 845 will take some of the slickness away from the BFWD, the the look on a white car can't be beat. The durability is insane as well.

 

IMO the 845 will remove all/some/most of the bfwd.


Sent using Tapatalk

 

Power Lock + Insignis v1 or v2...

 

How is the Insignis V2??

 

I actually just got my pot of Insignis v2 in two days ago, have not had a chance to use it yet.

 

For my white, using BFWD topped with Fuzion, but kinda itching to try out the DG combo.

 

I had an exchange with Pat at Collinite about the solvents in 845 removing previous applied LSPs. He indicated their chemists and staff have never seen 845 remove LSPs nor have they had such reports from any detailers. He brought up an interesting question... if 845 indeed did remove a previously applied LSP how would you know? :shrug:

TL

 

Swissvax Cleaner Fluid and Glacier Wax. Doesnt get better than that.

 

Wolfgang Deep Gloss Sealant + CG 50/50

 

What do you guys think about using Wolfgang Total Swirl Remover, then Werkstatt Primer followed by Trigger? Do you think P21S carnauba would be a good LSP or would the Werkstatt system be fine?

PS. I have a 2007 Alpine White X5

 

Pre-sealant, pre-wax paint preparation would make the most difference. On a white car, it is much harder to see spider-webbing, swirls, etc, so it is difficult to correct them if you can't see them. However, these almost-invisible swirls affect the reflectivity of your paint. You may need halogen, xenon, or LED detailing lights to see the paint defects.

After you correct the paint to perfection using random-orbital or rotary machine polishers (and appropriate polishes), then you can apply 2-3 layers of protecting sealant, and then apply your layer of "shine" (ie. carnauba wax or a glossy polymer sealant). This would yield maximum reflectivity.

Since you mentioned durability, Zaino products have been tested on other forums and were found to be very durable. I use Zaino products on my personal vehicle (dark blue/black Lexus LS).

 

My personal combo is 845 + AutoGlym HD .. my 19 year old white paint shines like no tomorrow!

 

105/AG HD + AW after every wash makes my white 2000 GT Mustang paint look and feel great. I still need to learn up on this "pre polishing" stuff....don't quite understand it in all honesty.

 

Wash with iron x soap gel, werkstat prime strong, AJT as many times as you want